Torsional oscillations (TO)

Specific inputs

  • l_TO (default l_TO=.false.) is a logical. It needs to be turned on to compute the torsional oscillations diagnostics (TO) computed.

  • sDens (default sDens=1.0) is a float. It gives the relative point density of the cylindrical grid (in the radial direction).

  • zDens (default zDens=1.0) is a float. It gives the relative point density of the cylindrical grid (in the vertical direction).

Standard inputs

  • n_TO_step (default n_TO_step=0) is an integer. This is the number of timesteps between two TO outputs.

  • n_TOs (default n_TOs=1) is an integer. This is the number of TO outputs to be written.

  • t_TO (default t_TO=-1.0 -1.0 ...) is real array, which contains the times when TO outputs are requested.

  • dt_TO (default dt_TO=0.0) is a real, which defines the time interval between TO outputs.

  • t_TO_start (default t_TO_start=0.0) is a real, which defines the time to start writing TO outputs.

  • t_TO_stop (default t_TO_stop=0.0) is a real, which defines the time to stop writing TO outputs.

  • n_TOmovie_step (default n_TOmovie_step=0) is an integer. This is the number of timesteps between two TO_mov outputs.

  • n_TOmovie_frames (default n_TOmovies=1) is an integer. This is the number of TO_mov outputs to be written.

  • t_TOmovie (default t_TOmovie=-1.0 -1.0 ...) is real array, which contains the times when TO_mov outputs are requested.

  • dt_TOmovie (default dt_TOmovie=0.0) is a real, which defines the time interval between TO_mov outputs.

  • t_TOmovie_start (default t_TOmovie_start=0.0) is a real, which defines the time to start writing TO_mov outputs.

  • t_TOmovie_stop (default t_TOmovie_stop=0.0) is a real, which defines the time to stop writing TO_mov outputs.